final A4000 Measurements (Frequency Response Graphs) and Comparisons with Etymotic ER2XR

I had posted measurements (frequency response graphs) earlier for final A4000 based on my old rig. Here are the latest measurements based on v1.0 of my IEM Measurement Rig.

final A4000 Left and Right Channel Frequency Responses

3 samples each of the left and right channel. For each sample I remove and re-insert the IEM.

final A4000 Average Frequency Response

Average of 6 samples (3 samples of left channel plus 3 samples of right channel).

final A4000 vs Etymotic ER2XR (normalized at 85dB@1kHz)

final A4000 vs Etymotic ER2XR (normalized at 85dB@200Hz)

Etymotic ER2R Measurements (Frequency Response Graphs)

These are the first measurements from v1.0 of my IEM Measurement Rig.

Etymotic ER2XR Left and Right Channel Frequency Responses

3 samples each of the left and right channel. For each sample I remove and re-insert the IEM.

Etymotic ER2XR Average Frequency Response

Average of 6 samples (3 samples of left channel plus 3 samples of right channel).

Compared to KopiOKaya’s ER2XR Frequency Response (Average)

KopiOKaya was kind enough to share his ER2XR measurements (from his rig) with me for comparison and our measurements are pretty close.

Crinacle’s ER2XR Measurement

There are some differences but overall it’s pretty comparable.

QKZ VK4 vs Sony MH755 (SBH56) Measurements (Frequency Response Graphs)

So I took out the QKZ VK4 today to measure (using my DIY-tube rig) and I was pleasantly surprised to see why I remember liking them.

Note: The graphs don’t accurately represent what you might hear and are only representational. Improving them is an ongoing process.

Measurements taken using pre v0.1 of my DIY IEM measurement rig